Often we are asked how we keep glass as clean as we do and how do customers keep it clean. There is no industry secret or complicated methods, but just simple maintenance and a single spray.
We often see dirty glass, silicone, and tile. Mold, soap scum, and water stains are fairly common and most people don't know how to prevent it! We suggest you do the following, whether you have a frame-less or semi-framed unit:
- Wipe off the glass after every shower with a squeegee or microfiber cloth.
- Make sure there is no standing water on the unit or silicone.
- Purchase Diamond Seal or Showerguard if it is a new unit or a very clean existing unit.
We sell an industry standard cleaning spray called Hi-Sheen. We use it to clean all of our glass products and other glass surfaces. It can be used as needed with a micro fiber cloth. in conjunction with that, we always recommend a water repellent product such as Diamond Seal or Showerguard.
Diamond Seal is a liquid polymer coating we apply onto the glass which helps water bead off of the glass. It seals the pores of the glass so contaminants cannot enter the pores. It does require minor maintenance depending on use. We provide all customers with a kit that includes reactivation liquid, water stain remover, glass cleaner, sponge, and micro fiber wipe. We also provide Showerguard glass. It does the same thing, however, instead of a liquid film, the formula is baked into the glass.
For glass that has already been stained, we also sell "Gamma Cream", which is a rough fluid meant to try and remove water stains that have not had time to settle into the glass.
All of our cleaning fluids and sprays can be purchased in the office or shipped to your location.
If you follow these methods and recommendations, your glass will look like new years down the line!